Mostra el registre parcial de l'element

dc.contributorUniversitat Ramon Llull. IQS
dc.contributor.authorBaldi Boleda, Tomàs
dc.contributor.authorSadeghi, Ehsan
dc.contributor.authorColominas Guàrdia, Carles
dc.contributor.authorGarcía Granada, Andrés-Amador
dc.date.accessioned2024-02-01T21:09:14Z
dc.date.available2024-02-01T21:09:14Z
dc.date.issued2021-06-23
dc.identifier.issn2073-4360ca
dc.identifier.urihttp://hdl.handle.net/20.500.14342/3844
dc.description.abstractNanopattern replication of complex structures by plastic injection is a challenge that requires simulations to define the right processing parameters. Previous work managed to simulate replication for single cavities in 2D and 3D, showing high performance requirements of CPU to simulate periodic trenches in 2D. This paper presents two ways to approach the simulation of replication of complex 3D hydrophobic surfaces. The first approach is based on previous CFD Ansys Fluent and compared to FE based CFD Polyflow software for the analysis of laminar flows typical in polymer processing and glass forming as well as other applications. The results showed that Polyflow was able to reduce computing time from 72 h to only 5 min as desired in the project. Furthermore, simulations carried out with Polyflow showed that higher injection and mold temperature lead to better replication of hydrophobicity in agreement with the experiments. Polyflow simulations are proved to be a good tool to define process parameters such as temperature and cycle times for nanopattern replication.ca
dc.format.extent12 p.ca
dc.language.isoengca
dc.publisherMDPIca
dc.relation.ispartofPolymersca
dc.rightsAttribution 4.0 International*
dc.rights© L'autor/a*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subject.otherHydrophobicityca
dc.subject.otherNanopatternca
dc.subject.otherReplicationca
dc.subject.otherPlastic injectionca
dc.subject.otherSimulationca
dc.subject.otherComputational fluid dynamics (CFD)ca
dc.subject.otherFinite elements (FE)ca
dc.subject.otherVolume of fluid (VOF)ca
dc.subject.otherViscosityca
dc.subject.otherHidrofobicitatca
dc.titleSimulation Approach for Hydrophobicity Replication via Injection Moldingca
dc.typeinfo:eu-repo/semantics/articleca
dc.rights.accessLevelinfo:eu-repo/semantics/openAccess
dc.rights.accessLevelinfo:eu-repo/semantics/openAccess
dc.embargo.termscapca
dc.subject.udc66ca
dc.identifier.doihttps://doi.org/10.3390/polym13132069ca
dc.relation.projectIDinfo:eu-repo/grantAgreement/EU/FEDER/COMRDI16-1-0018ca
dc.description.versioninfo:eu-repo/semantics/publishedVersionca


Fitxers en aquest element

 

Aquest element apareix en la col·lecció o col·leccions següent(s)

Mostra el registre parcial de l'element

Attribution 4.0 International
Excepte que s'indiqui una altra cosa, la llicència de l'ítem es descriu com http://creativecommons.org/licenses/by/4.0/
Comparteix a TwitterComparteix a LinkedinComparteix a FacebookComparteix a TelegramComparteix a WhatsappImprimeix